Don’t Believe These Lithium Ion Charging Myths

Lithium-ion batteries are the backbone of modern society, powering all our mobile devices and electric vehicles. However, with this widespread usage comes a lot of misinformation and myths about charging them. Here we demystify some common lithium ion charging myths to ensure that you can get the most out of your battery.

Myth 1: Always Charge Your Battery to 100%

One myth we constantly hear is that you have to charge your battery up to 100% every time. While it feels good knowing that your phone has a full tank for you to work/play around with, doing so could lead to reduced capacity over time due to chemical reactions within the battery (see table below)! Overcharging or leaving your device plugged in for too long at 100% would contribute significantly towards damaging it’s ability; instead only do this on an occasional basis!

Charging between 40-60% improves ‘seasoning’ or reduce exposure while consistently charging up beyond safe levels increases exposure even further accelerating damage over-time.

Information extracted from Battery University

Myth 2: You Have To Let The Phone Die Before Charging

In contrast with what many people believe, letting the phone die before plugging in isn’t really helpful either Although older nickel-based batteries needed this, modern batteries no longer require this kind of draining, hence preventing it from potentially developing any sort of battery memory etc. Don’t let the phone go down to 0% since doing that repeatedly would draw more energy and age before its time is up!

To give your lithium-ion a boost when it falls to around 20 percent left, always look for power supply spots! In addition,your device responds better by receiving partial charges allowing charging impetus towards ensuring durability which helps avoid permanent shorts

Myth 3: It’s Okay To Use A Cheap Charging Cable

Buying cheap cables doesn’t guarantee you quality service as opposed to looking at other attributes like brand reliability, manufacturing standards et al. There are many reports on substandard USB-C cables leading devices to charge slowly or not at all while overheating problems represent another issue with great concerns among users such issues could present serious health damage; save some cash over long-term purchases but don’t take the risk.

Thus, assume your cable damages under minimal usage frequently due low-quality insulation – this may ruin charger lifespan overtime resulting in heavier expenses than expected!

Myth 4: The More Amps The Better

A fast-charging myth exists where people think super high amps warrant a sustainable solution for their daily use. Many customers fail to comprehend why using chargers with higher current ratings turn out problematic for devices even though they provide faster recharging speeds.

However, different manufacturers consider varying elements inclusive of wattage implications required printed current guidelines identified through research geared towards safety reasons ensuring choosing the right charger renders absolute capability improvements boosting every usability aspects!

Therefore be careful about asking much from already weak cables if you have multiple . Make sure they support your device capabilities so that everything remains within safe borders avoiding difficulties potentially facilitating future inconveniences caused through various means including safety specifications .

Myth 5: Always Keep Devices Plugged In Even When Fully Charged

Some people believe that leaving their device plugged in will continue to charge the battery, and when it reaches full capacity, the charging stops instantly. On the contrary, chargers produce high voltage which sounds alarms over heat buildups which consequently damages overall durability!

Heat emission cycles endured overtime lead chemical processes to occur negatively affecting your phone’s ability as they tend towards temperature damage inciting nuclear fallout disaster! So unless you want a new paperweight or love visiting repair shops, avoid repeatedly plugging in.

Myth 6: Using Your Device While Charging Is Dangerous

While using devices while charging them is another myth of great concern among users since it’s not an advisable move e.g. leaving devices closed inside bags etc., smartphone usage isn’t generally harmful if properly executed The fundamental goal behind this idea is to help prevent overheating especially when loads are continuously intense for prolonged periods without any noticeable changes observed making sure everything remains functional even under heavy pressure assures sustained usability standards – keeping every user satisfied.

Myth 7: It’s Best To Remove The Case When Charging

Sure cases improve look of devices but sometimes turn out obstructive hence interfering with proper airflow across mobile interior tending favourably towards exposing phonetop potential heating surfaces while recharging reducing overall quality providing less room for weaker heat emissions resulting in explosions or other catastrophic events liable harming users instead adhere strictly by separating chargers from accessories whether attached firmly giving enough breathing space between potentially volatile components!!!

Besides,it keeps things organized; save some money over long-term purchases albeit there’s no guarantee need not worry about certain mishappenings occurring somewhere down road such as tripping worsened simply because YOUR CORD KEEPS PULLING AWAY FROM RECEIVER PORT!

All myths highlighted above have some bit surface so avoiding misconceptions through adherence specific rules ensure survival regarding device maintenance ensuring maximum customer satisfaction levels achieved ; make use available resources around experiencing both quality products increased lifespan measures put in place extending warranty periods recharging according to manufacturer specifications will help economize costs accordingly sparing any future inconveniences endured charging equipment today.

So the next time you’re faced with a lithium-ion battery, don’t fall for these myths. Instead, take proactive steps like minimizing exposure times ensuring proper cooling processes are put in place learning more about your device’s characteristics and reducing overall power consumptions helps prolong average lifespan whilst remaining within expected safety limits avoiding problems potentially impacting fruitful utilization of devices over their expected lifetime standards; cause caution is the way out!!!

Dane Raynor

Hey there, I’m Dane Raynor, and I’m all about sharing fascinating knowledge, news, and hot topics. I’m passionate about learning and have a knack for simplifying complex ideas. Let’s explore together!